BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 11-09-2010, 08:03 PM
silvermikel silvermikel is offline
Lurker
 

Join Date: Nov 2010
Posts: 2
Default Bugs down at full throttle

this go kart it has been sitting for about a year and now every time i punch the gas it bugs down, has a severe lack of power and it dies. i have removed and clean the carb, adjusted it and put new fuel in it. i dont know what to do any more, any suggestions?
Reply With Quote
  #2  
Old 11-09-2010, 09:38 PM
olderthan's Avatar
olderthan olderthan is offline
Heavy Contributor
 

Join Date: Jan 2010
Location: dayton nev--lake tahoe,nv
Posts: 588
Default

welcome to the group-look for leak around intake-if you have to reclean carb use a breadtie thru jets after cleaning hold up to light and make sure you can see thru them
__________________
olderthan
2008 tomberline punisher
1500 spring 12g sliders
30mm cv pumper carb
uni filter no rev cdi
polaris xlt snowmobile shocks for front
w/550 magnum springs & blaster fronts on rear
and another buggy built working on mods gk-13
white spring 17 gram sliders so far
Reply With Quote
  #3  
Old 11-12-2010, 01:11 AM
silvermikel silvermikel is offline
Lurker
 

Join Date: Nov 2010
Posts: 2
Default

thanks for your help, there was no leaks arround the intake i used compressed air to blow the jets ans still does the same thing, somebody told me to check the timing on it, do you know where i can find a repair manual for this engine?
Reply With Quote
  #4  
Old 11-12-2010, 07:52 AM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
 

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default

Yeah, I was going to say it sounds like a dirty or gunkey carb. It could also be that your carb is not jetted properly.
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
Reply With Quote
  #5  
Old 11-12-2010, 08:54 AM
olderthan's Avatar
olderthan olderthan is offline
Heavy Contributor
 

Join Date: Jan 2010
Location: dayton nev--lake tahoe,nv
Posts: 588
Default

look in the manual section
__________________
olderthan
2008 tomberline punisher
1500 spring 12g sliders
30mm cv pumper carb
uni filter no rev cdi
polaris xlt snowmobile shocks for front
w/550 magnum springs & blaster fronts on rear
and another buggy built working on mods gk-13
white spring 17 gram sliders so far
Reply With Quote
  #6  
Old 11-12-2010, 08:55 AM
joshstep1's Avatar
joshstep1 joshstep1 is offline
Senior Member
 

Join Date: Oct 2009
Location: Clarksville TN
Posts: 1,141
Default

For?
__________________
-Josh
My Ride:
ASW Carbide

Mods:
Dr. Pulley Hit Clutch
FMF Slip-On Exhaust
No Rev. CDI
Uni Air Filter
130 Main jet
1500 RPM main clutch spring
11g sliders
75w Halogen Headlights

CARBIDE!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:32 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.