|
|
|
#1
12-29-2010, 11:29 PM
|
|||
|
|||
need help
bought helix 150 used for my daughter and about a week later it stopped in the drive and died. when I checked it out there was melted aluminum on the ground under the large rubber vent tube on the plastic cover on the left side of the buggy. have very little experence with these buggies. any help would be great. also the wheels will not roll.
|
|
#2
12-30-2010, 01:11 AM
|
||||
|
||||
Sounds like the motor is probably toasted. These engine vent some oil so the oil has to be checked before each ride to insure oil level is maintained.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU
|
|
#3
12-30-2010, 10:26 AM
|
||||
|
||||
|
Pull the cover off of the belt. It is on the left side of the engine. If you toasted the engine, it would still roll. Sounds like the variator came apart which is still a pretty cheap fix.
|
|
#4
12-30-2010, 10:58 AM
|
||||
|
||||
|
pull the cvt cover check the variator belt & clutch if it won't roll probaly variator or clutch failed
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far
|
|
#6
12-30-2010, 02:46 PM
|
||||
|
||||
|
http://buggymasters.com/forum/showthread.php?t=140 This Buggymasters vid and will give you an idea of how to service the CVT
|
 |
|
|
