![]() |
![]() |
|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
![]() |
|
Thread Tools |
#1
|
|||
|
|||
![]()
Well I ordered the parts to fix my cheapo used Fox Helix 150cc $280 dollar buggy.
I got the piston kit, cylinder kit and the cyl head kit. All for $156.00. I assume the previous owner was going to upgrade or he cracked the cyclinder and or the head. Hence, I do not have those, or the piston. I do have the head cover and I deduced the cyclinder and head as version "A" from that. I have the connecting rod and bottom end complete, so, on goes a piston and the rest. Wish me luck! Mike |
#2
|
||||
|
||||
![]()
by the time you add oil and stuff you will be under $500
not to bad olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#3
|
||||
|
||||
![]()
be sure you download the helix manuals at top of page
olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
![]() |
|
|