|
|
|
#1
10-19-2013, 11:29 PM
|
|||
|
|||
gas pouring
I just installed a new carb on my 150cc hammerhead and it ran fine for 5 to 10 minutes then it died. and saw gas running out of the upper vent hose that is between the electric choke and the big diaphram cap.its on the left side/driver side..so what will cause this problem.see my other posts by goldwinger this might help with the problem
|
|
#2
10-20-2013, 04:20 AM
|
||||
|
||||
|
I haven't gone thru the trouble of looking for ur other posts. But it may be ur float or vacuum lines if you have vacuum lines that is.(air in lines).
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils.
|
 |
|
|
