BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech
Reload this Page wont turn over
Register FAQ Calendar Arcade

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 03-28-2010, 03:53 PM
charles charles is offline
Lite Contributor
  

Join Date: Mar 2010
Posts: 37
Default wont turn over
got new battery charged it wont turn over replaced clutch could that be the problem sound like everything is grinding in the gear box sounds like i have troubles
Reply With Quote
  #2  
Old 03-28-2010, 05:13 PM
KID4LIFE's Avatar
KID4LIFE KID4LIFE is offline
Contributor
  

Join Date: Feb 2010
Location: CANTON, OH
Posts: 258
Default
is the grinding you hear from trying to start it or coming from the gear box? test the battery to make sure you have a full charge. if so, then it could be the starter solenoid or even the starter. if it's grinding, i would lean more towards the starter. the solenoid would make more of a clicking sound when it tries to engage the starter. make sure all your wires are connected good. a bad ground could cause the starter not to engage too. try these things and follow up and let us know what happens.
__________________
07 HH250SS
UNI
HIT CLUTCH
DR. PULLEY VARIATOR
RED MAIN
17g ROLLERS
12T/45T SPROCKETS
IRIDIUM PLUG
HP CDI & COIL
LED LIGHTS

ASW CARBIDE
UNI
12g SLIDERS
RED MAIN
39T SPROCKET (coming soon)
Reply With Quote
  #3  
Old 03-28-2010, 05:47 PM
charles charles is offline
Lite Contributor
  

Join Date: Mar 2010
Posts: 37
Default
will do thought maybe i should take clutch off to see if its too tight its like it wont turn and battery leads get hot
Reply With Quote
  #4  
Old 03-28-2010, 05:50 PM
KID4LIFE's Avatar
KID4LIFE KID4LIFE is offline
Contributor
  

Join Date: Feb 2010
Location: CANTON, OH
Posts: 258
Default
what kind of buggy/engine do you have? unless the belt and clutch are frozen it shouldn't keep the engine from turning over. you could disconnect the belt just to be sure and then try it.
__________________
07 HH250SS
UNI
HIT CLUTCH
DR. PULLEY VARIATOR
RED MAIN
17g ROLLERS
12T/45T SPROCKETS
IRIDIUM PLUG
HP CDI & COIL
LED LIGHTS

ASW CARBIDE
UNI
12g SLIDERS
RED MAIN
39T SPROCKET (coming soon)
Reply With Quote
  #5  
Old 03-28-2010, 05:57 PM
charles charles is offline
Lite Contributor
  

Join Date: Mar 2010
Posts: 37
Default
the gy6 150cc yes the grind is like the gears it turns for a little but then just like not enough power to turn it and i got a new battery and its charged 100 % its a loud grind not normal i could move clutch by hand
Reply With Quote
  #6  
Old 03-28-2010, 05:59 PM
charles charles is offline
Lite Contributor
  

Join Date: Mar 2010
Posts: 37
Default
im not a mechnic but can follow directions i got the clutch on by watching buggy masters vid thats why i love this site
Last edited by charles; 03-28-2010 at 06:22 PM.
Reply With Quote
  #7  
Old 03-28-2010, 06:05 PM
charles charles is offline
Lite Contributor
  

Join Date: Mar 2010
Posts: 37
Default
i have grounds hooked to clutch box clean ground no paint on ground part
Last edited by charles; 03-28-2010 at 06:21 PM.
Reply With Quote
  #8  
Old 03-28-2010, 06:24 PM
charles charles is offline
Lite Contributor
  

Join Date: Mar 2010
Posts: 37
Default
so u think starter is best next step?
Reply With Quote
  #9  
Old 03-28-2010, 08:52 PM
olderthan's Avatar
olderthan olderthan is offline
Heavy Contributor
  

Join Date: Jan 2010
Location: dayton nev--lake tahoe,nv
Posts: 588
Default
charles
take the sparkplug out then try cranking
if still weak pull starter next and test it
olderthan
__________________
olderthan
2008 tomberline punisher
1500 spring 12g sliders
30mm cv pumper carb
uni filter no rev cdi
polaris xlt snowmobile shocks for front
w/550 magnum springs & blaster fronts on rear
and another buggy built working on mods gk-13
white spring 17 gram sliders so far
Reply With Quote
  #10  
Old 03-28-2010, 09:16 PM
charles charles is offline
Lite Contributor
  

Join Date: Mar 2010
Posts: 37
Default
ty well i took off clutch plate and my front clutch wheel was grinding on cover is that one shot now or can it still work with that front outside wheel ground down a little?
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:01 AM.

Contact Us - BuggyMasters An on line mini buggy forum and go kart forum - Archive - Top

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.